Impact of sublethal doses of 2,4-D, simulating drift, on tomato yield

Tomato is considered one of the most sensitive crops regarding 2,4-D drift. In many cases, such susceptibility has led to important restrictions in the use of 2,4-D based products. Field experiments were carried out for two consecutive years in tomato, by applying sublethal doses of 2,4-D (ranging from 0.42 to 13.44 g a.i. ha(-1)) directly to plants, at different stages of growth, as a simulation of eventual drifts to the crop. The range of rates was based on the assumption of a 0.0625-2.0% drift level of a 1 L ha(-1) of the most common formulated herbicides. For this crop, the range of rates between 0.42 and 13.44 g a.i ha(-1) applied at the beginning of flowering caused a linear crop reduction. On the other hand, rates < or = 13.44 g a.i. ha(-1) applied after full development of fourth truss stage or latter had no effect on crop yield or development. For tomato, tolerance to 2,4-D strongly increases with plant age.     

Allelopathic potential and systematic evaluation of organic extracts from Canavalia ensiformis leaves (Jack beans)

This article describes the assessment of possible allelopathic potential of organic extracts obtained from leaves of Canavalia ensiformis under laboratory conditions. Furthermore, a systematic evaluation of these extracts was carried out using specific protocols developed in capillary electrophoresis (CE) to determine some groups of secondary metabolites. After the identification and quantification of compounds, the effects of compounds on germination of some common weeds was investigated, which are becoming a real problem in pastures in the state of Pará, Brazil.     

New large solar photocatalytic plant: set-up and preliminary results

A European industrial consortium called SOLARDETOX has been created as the result of an EC-DGXII BRITE-EURAM-III-financed project on solar photocatalytic detoxification of water. The project objective was to develop a simple, efficient and commercially competitive water-treatment technology, based on compound parabolic collectors (CPCs) solar collectors and TiO2 photocatalysis, to make possible easy design and installation. The design, set-up and preliminary results of the main project deliverable, the first European industrial solar detoxification treatment plant, is presented. This plant has been designed for the batch treatment of 2 m3 of water with a 100 m2 collector-aperture area and aqueous aerated suspensions of polycrystalline TiO2 irradiated by sunlight. Fully automatic control reduces operation and maintenance manpower. Plant behaviour has been compared (using dichloroacetic acid and cyanide at 50 mg l(-1) initial concentration as model compounds) with the small CPC pilot plants installed at the Plataforma Solar de Almería several years ago. The first results with high-content cyanide (1 g l(-1)) waste water are presented and plant treatment capacity is calculated.     

An evaluation of olive-tree bark for the biological monitoring of airborne trace-elements at ground level

There is a need to start looking into the possibility of tree bark for biomonitoring. Bark from olive trees (Olea europaea Linn.) has been collected over an area in northwestern Portugal, featuring a blend of rural lands, industrial towns and coastal environments. Samples were analysed through INAA and PIXE for their elemental contents. Results from both techniques were reconciled and then compared with an extensive database on 46 trace elements in Parmelia spp. thalli from the same sites and mostly from the very bark substrates. Distribution-free, nonparametric statistics show that, despite signal magnitude, variation patterns of bark and lichen concentrations follow one another in a most significant way. Selected elements in bark also correlate to a superior extent. As far as this investigation goes, there is no reason whatsoever for discarding bark as an alternative to lower epiphytes.     

Floral colour change in <Emphasis Type="Italic">Byrsonima variabilis</Emphasis> (Malpighiaceae) as a visual cue for pollen but not oil foraging by oil-collecting bees

Pollinators search for multiple flora resources throughout their life cycle. Most studies, however, only assess how bees discriminate floral cues in the context of nectar foraging. In the present study, we sought to elucidate whether oil-collecting bees discriminate flowers of Byrsonima variabilis (Malpighiaceae) with petals of different colours when foraging for pollen or oil. As the colour of the standard petal changes during anthesis, we characterised the spectral reflectance patterns of flowers throughout anthesis and modelled chromatic perceptual space to determine how these colour patterns are perceived by bees. Through the quantification of flower pollen in the different phases, we found that the colour of the standard petal is an honest cue of the presence of pollen. Centridine bees preferentially visited flowers with a yellow (bee’s green) colour when searching for pollen, but indiscriminately visited flowers with different petal colours when searching for floral oil. We suggest that standard petals, in the species studied and others of the genus, like nectar guides, act as pollen guides, which oil-collecting females use to detect pollen-rich flowers. Moreover, they use different floral clues during foraging for different resources in the same host plant.     

Illumina sequencing-based analysis of a microbial community enriched under anaerobic methane oxidation condition coupled to denitrification revealed coexistence of aerobic and anaerobic methanotrophs

Methane is produced in anaerobic environments, such as reactors used to treat wastewaters, and can be consumed by methanotrophs. The composition and structure of a microbial community enriched from anaerobic sewage sludge under methane-oxidation condition coupled to denitrification were investigated. Denaturing gradient gel electrophoresis (DGGE) analysis retrieved sequences of Methylocaldum and Chloroflexi. Deep sequencing analysis revealed a complex community that changed over time and was affected by methane concentration. Methylocaldum (8.2%), Methylosinus (2.3%), Methylomonas (0.02%), Methylacidiphilales (0.45%), Nitrospirales (0.18%), and Methanosarcinales (0.3%) were detected. Despite denitrifying conditions provided, Nitrospirales and Methanosarcinales, known to perform anaerobic methane oxidation coupled to denitrification (DAMO) process, were in very low abundance. Results demonstrated that aerobic and anaerobic methanotrophs coexisted in the reactor together with heterotrophic microorganisms, suggesting that a diverse microbial community was important to sustain methanotrophic activity. The methanogenic sludge was a good inoculum to enrich methanotrophs, and cultivation conditions play a selective role in determining community composition.     

AnSBBR applied to the treatment of wastewater from a personal care industry: Effect of organic load and fill time

The objective of this work was to study the technological feasibility of treating wastewater from a personal care industry (PCI-WW) in a mechanically stirred anaerobic sequencing batch biofilm reactor (AnSBBR) containing immobilized biomass on polyurethane foam. An assessment was made on how system efficiency and stability would be affected by: increasing organic load; supplementation of nutrients and alkalinity; and different feed strategies. The AnSBBR operated with 8-h cycles, stirring speed of 400 rpm, temperature of 30 °C, and treated with 2.0 L wastewater per cycle. First the efficiency and stability of the AnSBBR were studied when submitted to an organic loading rate (OLR) of 3.1–9.4 gCOD/(L d), and when the PCI-WW was supplemented with nutrients (sucrose, urea, trace metals) and alkalinity. The AnSBBR was shown to be robust and presented stability and removal efficiency exceeding 90%. At an OLR of 12.0 gCOD/(L d) efficiency became difficult to maintain due to the presence of commercial cleansers and disinfectants in the wastewater lots. In a subsequent stage the AnSBBR treated the wastewater supplemented with alkalinity, but with no nutrients at varying feed strategies and maintaining an OLR of approximately 9.0 gCOD/(L d). The first strategy consists of feeding 2.0 L of the influent batchwise [OLR of 9.4 gCOD/(L d)]. In the second 1.0 L of influent was fed-batchwise and an additional 1.0 L was fed fed-batchwise [OLR of 9.2 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was maintained but supplied in different periods. In the third strategy 1.0 L of treated effluent was maintained in the reactor and 1.0 L of influent was fed fed-batchwise [OLR of 9.0 gCOD/(L d)], i.e., in relation to the first strategy the feed volume was different but the feed period was the same and the OLR was maintained by increasing the influent concentration. Comparison of the first and second strategies revealed that organic matter removal efficiency was unaffected (exceeding 90%). The third strategy resulted in a reduction in average removal efficiency from 91 to 83% when compared to the first one. A kinetic study resulted in first order kinetic parameters ranges from 0.42 to 1.46 h⁻¹ at OLRs from 3.1 to 12.0 gCOD/(L d), respectively, and the second feed strategy [OLR of 9.2 gCOD/(L d)] was shown to be the most favorable.     

Municipal solid waste shear strength parameters defined through laboratorial and in situ tests

This paper presents the parameters of municipal solid waste shear strength determined in the laboratory (triaxial tests) and by in situ tests: standard penetration tests (SPT) and cone penetration tests (CPT). The results analyzed here are part of a study carried out on the Santo Tirso landfill (north of Portugal) between 2001 and 2007. The influence of the strain levels, waste composition, and waste age on the shear strength parameters is presented, as well as an attempt to establish some correlations between the SPT and CPT tests and to estimate municipal solid waste (MSW) friction angles from the SPT tests. The results indicate that the aging of the waste, which is characterized by a decrease in fibrous and organic materials and an increase in inert materials and fine fraction, leads to an increase in frictional resistance and to a decrease in cohesion. The results of the SPT and CPT tests indicate higher penetration resistance in older and deeper waste. Estimating the frictional resistance from the SPT test seems to obey an empirical relationship expressed by a power function, which depends on the strain level.

Implications: Comparison of shear strength parameters of municipal solid waste (MSW) determined through laboratory (triaxial tests) and in situ tests (SPT and CPT) showed that the greater amount of fibrous and granular elements leads to an increase in “cohesion” and in friction angle values, respectively. Waste aging results in an increase in frictional resistance and in a decrease in “cohesive” resistance. This is consistent with the composition changes with aging: increase of the relative quantity of inert materials and fine fraction, and decrease in particle size, in organic matter content, and in fabrics and plastics.     

Biochemical responses in armored catfish (Pterygoplichthys anisitsi) after short-term exposure to diesel oil,pure biodiesel and biodiesel blends

Biodiesel fuel is gradually replacing petroleum-based diesel oil use. Despite the biodiesel being considered friendlier to the environment, little is known about its effects in aquatic organisms. In this work we evaluated whether biodiesel exposure can affect oxidative stress parameters and biotransformation enzymes in armored catfish (Pterygoplichthys anisitsi, Loricariidae), a South American endemic species. Thus, fish were exposed for 2 and 7 d to 0.01 mL L⁻¹ and 0.1 mL L⁻¹ of pure diesel, pure biodiesel (B100) and blends of diesel with 5% (B5) and 20% (B20) biodiesel. Lipid peroxidation (malondialdehyde) levels and the activities of the enzymes glutathione S-transferase, superoxide dismutase, catalase and glutathione peroxidase were measured in liver and gills. Also, DNA damage (8-oxo-7, 8-dihydro-2′-deoxyguanosine) levels in gills and 7-ethoxyresorufin-O-deethylase activity in liver were assessed. Pure diesel, B5 and B20 blends changed most of the enzymes tested and in some cases, B5 and B20 induced a higher enzyme activity than pure diesel. Antioxidant system activation in P. anisitsi was effective to counteract reactive oxygen species effects, since DNA damage and lipid peroxidation levels were maintained at basal levels after all treatments. However, fish gills exposed to B20 and B100 presented increased lipid peroxidation. Despite biodiesel being more biodegradable fuel that emits less greenhouse gases, the increased lipid peroxidation showed that biofuel and its blends also represent hazards to aquatic biota.     

Histopathological changes in the earthworm Eisenia andrei associated with the exposure to metals and radionuclides

Earthworms were exposed for 56 d to a contaminated soil, from an abandoned uranium mine, and to the natural reference soil LUFA 2.2. Histological changes in earthworm’s body wall (epidermis, circular and longitudinal muscles) and gastrointestinal tract (chloragogenous tissue and intestinal epithelium) were assessed, after 0, 14 and 56 d of exposure. Results have shown alterations in all the studied tissues after 14 d of exposure (except for the intestinal epithelium), yet more severe effects were registered after 56 d of exposure. Herein we report histopathological alterations as a good biomarker for the evaluation of soil quality. We also demonstrate that morphological changes in the body wall and gastrointestinal tract, are important endpoints that could be added to earthworm’s standardized tests, for the evaluation of soil toxicity, as part of the risk assessment of contaminated areas.